A compact, low profile pillar for single or two phase applications. Normally buried to within 100 mm of the bottom of the lid.
| MATERIAL : |
UV Stabilised Polyethylene |
| LID SCREWS: |
2 x M8x16mm Button Head, Stainless Steel Screws, 5mm Drive |
| STANDARD COLOUR: |
Black |
|
| LEFT PICTURE: |
EP101-BLK-A |
Assembly |
| RIGHT PICTURE: |
EP101-BLK-B |
Base
|
|
Fitted with:
|
3x63 amp Redspot fuse carriers
1x4way brass neutral with S/S hardware
|
General Guide for Usage
An economical compact, low profile pillar for single or two-phase applications.
| Gyro Code: |
EP101 |
-BLK-A |
Black Assembly |
(base & lid, excluding any internal fittings) |
|
|
-BLK-B |
Black Base only |
(spare part purchase) |
|
|
-BLK-L |
Black Lid only |
(spare part purchase) |
Typical Installation Configurations
| Supplying |
Neutral Assm. |
Fuse Carriers |
| One property, single phase |
1 x 4way |
1 x 63 Amp(+1 x 32 Amp if ripple control) |
| Two properties, two phase |
1 x 4way |
4 x 63 Amp |
(This Is the maximum recommended configuration for this pillar)
| Key Dimensions |
|
|
|
| Height Overall |
Height Above G.L |
Base Area |
Fuse Mounting Area |
| 670 mm |
320mm (nom) |
310 x 310 mm |
200 mm Horizontal
165 mm Vertical
95 mm Face to Lid |
New Zealand areas where this unit is currently authorised for installation The EP101 is approved for use throughout New Zealand.
This information is provided in good faith as our understanding of approval for use within an area.
No liability is accepted for errors or changes to previous approval practices by new authorities.
|
