Hardware and Fuze Gear
Measurements and Part numbers
Fuse gear & racking
FUSE CARRIERS EX-STOCK
SKU | NAME | DESCRIPTION |
---|---|---|
104006 | EF32ABW-S/S (IPD) | IPD 32amp fuse back wire – sold separately |
104007 | EF32AFW-S/S (IPD) | IPD 32amp fuse front wire – sold separately |
502000 | 32AMP FUSE BW - FITTED (IPD) | IPD 32amp fuse front wire fitted to pillar |
502001 | 32AMP FUSE FW - FITTED (IPD) | IPD 32amp fuse front wire fitted to pillar |
104009 | EF63ABW-S/S (IPD) | IPD 63amp fuse back wire – sold separately |
104010 | EF63AFW-S/S (IPD) | IPD 63amp fuse front wire – sold separately |
109002 | EF63ABW-S/S (NZI) | NZI 63amp fuse back wire – sold separately |
109001 | EF63AFW-S/S (NZI) | NZI 63amp fuse front wire – sold separately |
502006 | 63AMP FUSE FW - FITTED (IPD) | IPD 63amp fuse back wire fitted to pillar |
502013 | 63AMP FUSE FW - FITTED (IPD) | IPD 63amp fuse front wire fitted to pillar |
502007 | 63AMP FUSE BW - FITTED (NZI) | NZI 63amp fuse back wire fitted to pillar |
502010 | 63AMP FUSE FW - FITTED (NZI) | NZI 63amp fuse front wire fitted to pillar |
502016 | 100AMP FUSE FW - FITTED(IPD) | IPD 100amp fuse front wire – fitted to pillar (this is the mini version which is the same size as the 63 amp) |
DISCONNECTS:
A selection of commonly supplied ABB and Jean Muller Disconnects are below, however, we can supply and install into our pillars/cabinets any disconnect configuration you may require.
SKU | NAME | DESCRIPTION |
---|---|---|
502017 | 160AMP HORIZONTAL DISCONNECT 3PH | Jean Mueller 160a hoz din, single pull + covers fitted to pillar |
502018 | 250AMP HORIZONTAL DISCONNECT 3PH | Jean Mueller 250a hoz din, single pull + covers fitted to pillar |
502019 | 400AMP HORIZONTAL DISCONNECT 3PH | Jean Mueller 400a hoz din, single pull + covers fitted to pillar |
Enquire | 630AMP HORIZONTAL DISCONNECT 3PH | Jean Mueller 630a hoz din, single pull + covers fitted to pillar |
Enquire | 160AMP VERTICAL DISCONNECT 3PH | Jean Mueller 160a vert din, single pull + covers fitted to pillar |
Enquire | 250AMP VERTICAL DISCONNECT 3PH | Jean Mueller 250a vert din, single pull + covers fitted to pillar |
Enquire | 400AMP VERTICAL DISCONNECT 3PH | Jean Mueller 400a vert din, single pull + coverss fitted to pillar |
Neutral Bars
SKU | NAME | DESCRIPTION |
---|---|---|
501000 | 1 WAY NEUTRAL STUD ASSEMBLY | 1 way neutral m8 stud, nuts & washer fitted to pillar |
501001 | 4 WAY NEUTRAL ASSEMBLY | 4 way Brass Neutral bar with M8 studs, nuts & washers, fitted to pillar |
501010 | 4 WAY APRON ASSEMBLY | As above with rubber apron |
501003 | 6 WAY NEUTRAL ASSEMBLY | 6 way brass neutral bar with m8 studs, nuts & washers, fitted to pillar |
501011 | 6 WAY APRON ASSEMBLY | As above with rubber apron |
501004 | 8 WAY NEUTRAL ASSEMBLY | 8 way brass neutral bar with m10 studs, nuts & washers, fitted to pillar |
501005 | 8 WAY APRON ASSEMBLY | As above with rubber apron |
501006 | 10 WAY NEUTRAL ASSEMBLY | 10 way brass neutral bar with m12 studs, nits & washers, fitted to pillar |
501012 | 10 WAY APRON ASSEMBLY | As above with rubber apron |
501007 | 13 WAY NEUTRAL BAR - M10/M12 | 13 way neutral bar with stainless steel nuts/washers, fitted to pillar. Maximum current tested to be 540A |
501008 | 20 WAY NEUTRAL BRASS BAR | 20 way neutral bar with brass nuts/washers |
Nylon Rivets
SKU | ITEM NAME | DESCRIPTION |
---|---|---|
106007 | M4X8 PUSH RIVET NYLON BLACK | BAGS OF 100 |
106005 | M5X7 PUSH RIVET NYLON BLACK (MOQX500) | BAGS OF 500 |
106004 | M5X9 PUSH RIVET NYLON BLACK | BAGS OF 100 |
106006 | M5.5 X 16.5 BLIND POP RIVET NYLON BLACK | BAGS OF 100 |
106008 | M6.4 X 19 TRUSS HEAD ANCHOR RIVET NYLON BLACK | BAGS OF 100 |
Nylon Tek Screw
SKU | ITEM NAME | DESCRIPTION |
---|---|---|
504001 | 12gx25 NYLON T40 S/TAP SCREW WITH DRIVER ASSEMBLY (LOTS OF 100) | POT OF 100 SCREWS WITH DRIVER INCLUDED |
Tools
SKU | ITEM NAME | DESCRIPTION |
---|---|---|
103080 | Cliplock Key | Key for use with the Cliplock and Rotational Locking systems |
105073 | Torx T40 Driver | Drill bit for use with Torx T40 Lid fastening screws & Plastic Tek Screws |
Interested?
Get In Touch
Having been around for over 50 years, GYRO Plastics is one of the leading plastics manufacturers in NZ. We are proudly family owned and operated with a carefully selected team of forward thinking individuals, committed to providing you the best service possible.
Success is no accident!
Reach out and let us know what problem you're trying to solve. We have the skills, experience and capacity to sort it for you.