EP1R - 1 Fuse
Our most compact pillar for single-phase applications or as a cover for above ground cable jointing.
MAXIMUM FUSE CAPACITY:
1 x 63A
- Lid Screws: 2 x M8 x 16 mm Button Head Hex Stainless Steel Screws, 5 mm Drive
- Comes fitted with a 1 way neutral stud
- Lid Screws: Button Head Torx Post or Hex Post Stainless Steel Screws, 5 mm Drive
- Can be fitted with a fuse carrier to suit your requirements.
Download EP1R Spec Sheet
|KEY DIMENSIONS (in mm):|
|Height Overall||Height above Ground Level||Foot print|
|870mm||380 mm||DIAMETER: 100mm|
|201000||EP1R ASSEMBLY & NEUTRAL STUD - BLACK||Assembly Black lid|
|201001||EP1R ASSEMBLY & NEUTRAL STUD - KHAKI||Assembly Khaki lid|
|201002||EP1R ASSEMBLY & NEUTRAL STUD - BLACK COUNTIES SPEC||Assembly Black lid|
|201004||EP1R LID ONLY - BLACK||Lid only Black|
|201005||EP1R LID ONLY - KHAKI||Lid only Khaki|
|201003||EP1R BASE - BLACK||Base Only|
|502010||63A FUSE BW - FITTED (NZI)||NZI 63amp fuse front wire fitted to pillar|
|502011||63A FUSE FW - FITTED (IPD)||IPD 63amp fuse front wire fitted to pillar|
|502001||32A FUSE FW - FITTED (IPD)||IPD 32amp fuse front wire fitted to pillar|
*please enquire for pricing on other brand fuse carriers as well as disconnects
Return To Products Page
Available From Your Local Wholesaler
You might also like ...
EP3R - 3 Fuse
A compact pillar for one to three phase applications or as a cover for above ground cable jointing. Normally buried to within 100 mm of the base of the lid.
Fuse gear & racking
We can supply a range of pre-installed fuse carriers or disconnects in our pillars and cabinets from reputable brands such as IPD, NZI, ABB and Jean Mueller.
Street Light Control Pillar
Designed to house ripple control units for street lighting. Can be supplied pre-wired to suit your spec.